Resin output of the hottest Russia decreased in ei

2022-08-06
  • Detail

Russia's Resin output fell in eight months

Russia's Resin output fell in eight months

October 9, 2014

[China paint information] due to the shutdown and maintenance of production units of large polymer manufacturers salavat and ufaorgsintez, Russia's PE output in August was 108600 tons, down from 111200 tons in July. Overall, the total monthly PE output of the country is 1.05 million tons. Among them, LDPE and HDPE output decreased year on year, while LLDPE output increased unexpectedly

the specific output of PE at all levels in Russia in the first eight months of this year is as follows:

accuracy of experimental force ± 1%

the output of "HDPE" in Russia in August was 68800 tons, a slight decline compared with that in July (the output of HDPE in that month was 68300 tons). In June, the total output of HDPE in the country was 579100 tons, down 17 percentage points compared with the same period last year when the material was poor. In order to meet the market demand, salavat and kazanorgsintez increased the operating rate of the device during this period. However, there are still three kinds of wood testing machines produced by Jinan new era Testing Instrument Co., Ltd. one is the electronic wood artificial universal testing machine, the manual liquid crystal wood universal testing machine and the hydraulic wood universal testing machine The following describes in detail the functions of three kinds of wood universal testing machines: to make up for the reduced output of stavrolen due to the shutdown and maintenance of the device

in August, Russia's LDPE output was 39700 tons, compared with 42800 tons in the previous month. In June, the total LDPE output of the country was 410400 tons, a decrease of 2% over the same period last year

although nizhnekamskneftekhim did not produce any LLDPE in August, the total output of this resin in Russia in the first eight months of this year was 16000 tons, a year-on-year increase of 13%

according to the MRC scanplast report, the total PE production in Russia in the first eight months of 2014 fell by 11 percentage points year-on-year. Except for LLDPE (linear low density polyethylene), PE output of other levels declined to varying degrees in January

Copyright © 2011 JIN SHI